What to do if MICROPOINT qLabs Vet shows error E004?
If the MICROPOINT Pet Care Product displays error code E004, indicating that insufficient blood was added to the sample well, retest using a new strip. Ensure that you add one large drop of blood correctly to the sample well.
What does E005 mean on MICROPOINT qLabs Vet Pet Care Product?
If your MICROPOINT Pet Care Product meter displays error code E005, indicating that the internal QC check is out of specifications, first, verify that the strip is within its expiry date and that the strip code was entered correctly. If the problem persists, retest with a new strip.
What does error E003 mean on MICROPOINT Pet Care Product?
If the MICROPOINT Pet Care Product meter displays error code E003, it means the ambient temperature is outside of the operational temperature range. Move the meter and strip to a location within the operational range of 10 °C to 35 °C and repeat the test.
How to fix E001 error on MICROPOINT qLabs Vet Pet Care Product?
If the MICROPOINT Pet Care Product meter displays error code E001, this indicates low battery power. Replace the batteries or use a power adapter as your power source.
What to do if MICROPOINT Pet Care Product shows E002 error?
If the MICROPOINT Pet Care Product meter displays error code E002, indicating a heating process timeout, turn off the meter. Allow it to equilibrate at ambient temperature (10-35°C) for at least 5 minutes before performing additional tests.
What does NO COAG mean on MICROPOINT Pet Care Product?
If the MICROPOINT Pet Care Product meter displays 'NO COAG,' it means the meter did not detect coagulation. Retest with a new strip. If the error message appears again, the result must be checked using another method.
General| Intended Use | Veterinary diagnostics |
|---|---|
| Display | Touchscreen LCD |
| Connectivity | USB, Bluetooth |
| Power Source | Rechargeable battery, AC adapter |
| Parameters Measured | glucose, creatinine |
| Device Type | Handheld Point-of-Care Analyzer |
Guidelines for proper handling, storage, and maintenance of the device.
Specifies optimal operating temperature, humidity, and electromagnetic conditions.
Detailed instructions and best practices for accurate test execution.
Safety instructions for the device's internal battery.
Procedures for charging the device and handling low battery status.
Managing user accounts and login credentials for the device.
Step-by-step guide for correctly inserting a test strip.
Instructions for adding the blood sample to the test strip.
A comprehensive list of error codes and their corrective actions.
To Next Page