AiDEX
TM
Continuous Glucose Monitoring System
Quick Guide
MicroTech Medical (Hangzhou) Co.,Ltd.
A B
Open the package.
Take out the applicator with built-in
sensor by turning counter clockwise.
Prepare the device:
Select site:
A B
Select a place on your stomach or upper arm.
Notes: Avoid areas with scars, moles, stretch marks or lumps.
1
Sensor Application
Clean sensor site with alcohol wipe. Allow
site to dry completely before proceeding.
A B
Apply the sensor:
Place the applicator on desired
location.Press the applicator firmly
against skin, and press the button to
launch the sensor applicator
afterwards. Make sure the sensor base
adheres to your skin.
Remove the applicator from skin,
leaving the sensor base on your
body.
Your AiDEX
TM
Continuous Glucose Monitoring System (CGM)
includes the following key parts:
Personal Diabetes Assistant (PDA)/APPTransmitterApplicator with
built-in sensor
To Next Page
Need help?
General
