Microtech e-tab LTE - Page 38

38
Warnings
Only use the supplied power adapter and the USB cable
to charge the battery of your e-tab LTE. Using a different
power adapter may damage the tablet.
Make sure you plug the power supply into the power
outlet with the correct input voltage. The adapter output
voltage is 5.0V DC, 2A.
We suggest you to charge your e-tab LTE through
grounded outlet.
Keep your device away from strong magnetic elds which
may damage the device.
Only the Microtech qualied staff can repair the tablet.
We recommend keeping the volume at a safe level to
preserve your health. In case of prolonged exposure to
loud noise hearing troubles may arise.