Microtech e-tab Pro 4+ - Page 47

e-tab Pro
47
Warnings
Preferably use the supplied power adapter to charge the
battery of your e-tab Pro 4+ / e-tab Pro 4. Using a different
or incompatible power adapter could damage the tablet.
Make sure you connect the power adapter to the
appropriate power outlet with the correct input power
rating. The output voltage of the adapter is DC 12V, 3A.
e-tab Pro 4+ / e-tab Pro 4 should be reloaded at least
every 3 months.
Keep the tablet away from strong magnetic elds - they
could damage the device.
Only people qualied and authorized by Microtech can
repair e-tab Pro 4+ / e-tab Pro 4.
Be careful not to drop the device or bump it against
objects, it could cause damage not covered by the
standard warranty.
Do not expose e-tab Pro 4+ / e-tab Pro 4 to humid
environments, rain or excessively hot environments.
Do not use chemicals or detergents to clean e-tab Pro 4+
/ e-tab Pro 4, they could corrode the surface.