Microtech
e-tab Pro
49
WARNINGS
Use only the power adapter included to charge the battery
of your e-tab Pro. The use of a different power supply
could damage your product.
Make sure you power adapter supply into the power
outlet with the correct input voltage. The adapter output
voltage is DC 12V, 3A.
e-tab Pro should be charged at least once every 3 months.
Keep your e-tab Pro away from strong magnetic elds:
they may damage the device.
Only qualied personnel authorized by Microtech can
repair the product.
Be careful not to drop the device or bump it against
objects, it may cause damages not covered by the
standard warranty.
Do not expose your device to damp environments, rain or
extremely hot environments.
The contact with water, sand or prolonged exposure to
high temperatures may cause an irreparable damage.
To Next Page
Loading...
