B-4 Microtek ScanWizard Pro for Windows
6 The image
button shows a thumbnail of the scanner you're using. Clicking
on this button will activate your scanner and display whatever image is on
your scanner. The image is shown in the Scanner Test display (the area
above the image button), as shown below.
If you are using a scanner accessory such as a Transparent Media Adapter
(TMA) or Auto Document Feeder (ADF) with your scanner, this will also
show up as a second Image button. There will then be two Image buttons
— one for the scanner, and one for the scanner accessory you're using
(either the TMA or ADF).
7 The
ExitExit
ExitExit
Exit button allows you to leave the Scanner Test utility.
Second image
button shows
up if your
scanner is
connected with
an accessory.
For Example,
TMA.
Image in scanner is
displayed here after you
click on the image button.
To Next Page
Loading...
