Downloading Files
System Requirements
Color display with 24-bit color output capability
CD-ROM drive (for installing software)
128MB RAM or more recommended
PC Windows 98/98SE/2000/Me/XP
Pentium PC or higher with USB port
Mac Mac OS 9.x; Mac OS X 10.1.3 or later
Apple Macintosh Series with built-in USB port
NOTE: If you use Windows 98/98SE, please follow the
steps below to install the camera driver first:
1. Turn on your computer and insert the supplied
Microtek CD-ROM in the CD-ROM drive.
The Microtek Software Installer screen appears
automatically.
2. Click the Camera Driver button and follow the on-
screen instructions to install the driver.
3. Click the Exit button after the Microtek Software
Installer has successfully installed the camera driver.
4. Restart your computer.
To view the recorded images on your computer,
follow the steps as outlined below in sections A, B,
C, and D.
A. Getting the Camera Ready
1. Make sure the SD card containing the images you
wish to download is inserted in the camera.
2. Make sure that the USB Switch is switched to USB
Mode.
If the USB Switch is set to the incorrect mode, you will
need to do the following:
a. Press the MENU button to enter
the Setup mode ( ).
b. Select USB Switch, then
select USB Mode.
c. Press the MENU twice to exit the
mode menu.
B. Connecting the Camera
1. Make sure your computer is turned on.
2. Connect the camera to the
computer using the provided USB
cable.
Connect one end of the USB
cable to the cameras USB
connector.
Connect the other end of the
USB cable to a free USB
connector on your PC.
In a few moments, your computer
will automatically detect the camera.
A USB Mode screen appears,
indicating that USB connection is complete.
To Next Page
Loading...
