49
Dowloading to Your Computer
The camera is equipped with an USB connector that
allows you to view images recorded by the camera on
a computer instead of on the LCD screen.
NOTE: If you use Windows 98/98SE, please follow
the steps below to install the camera driver first:
1. Turn on your PC and insert
the supplied Microtek CD-
ROM in the CD-ROM drive.
The Microtek Software
Installer screen appears
automatically.
2. Click Camera Driver when it appears on the
screen, then follow the on-screen instructions to
install.
3. Click EXIT on the Microtek Software Installer
screen when the camera driver has been installed.
4. Restart your computer.
System Requirements
CD-ROM drive (for installing software)
A display with 24-bit color output capability
128MB RAM or more recommended
PC Windows 98/98SE/2000/Me/XP
Pentium PC or higher with USB port
Mac Mac OS 9.x; Mac OS X 10.1.3 or later
Apple Macintosh series with built-in USB port
To view the recorded images on your computer, follow
the steps below:
1. Get the camera ready.
2. Connect the camera to the computer.
3. Copy the camera's images to the computer.
4. View the camera's images on the computer.
To Next Page
Loading...