$
Images or Movie/Audio clips cannot
be played back.
A: The Mode switch is set to the incorrect mode.
Set the Mode switch to Playback mode ( ).
A: The SD card is write-protected.
Set the write-protected tab on the SD card to the unlocked position.
A1: The Mode switch is set to the incorrect mode.
Set the Mode switch to Playback mode (
).
A2: The Video Out setting is set to the incorrect system.
Enter the Setup mode, set Video Out to NTSC or PAL depending
on your video output system.
A3: The camera is disconnected from the TV set.
Make sure the video cable is properly connected to both the camera
and the TV set.
The camera cannot delete images
or movie/audio clips.
Images or Movie/Audio clips cannot
be played back on TV.
To Next Page
Loading...