19
Picture Menu
This menu is used for making common image adjustments. Note that some of the adjustments may
be grayed out, indicating that they are not selectable. This indicates the use of a digital video input
signal (DP, HDMI or USB Type-C). These selections are fixed/not adjustable for digital video signals.
The VGA video signal (because it is analog) may require all adjustments, so they are all selectable
when VGA is being used.
Increases or decreases the contrast of the picture. Press or , select the
desired level, and then press SELECT.
Range: 0-100
Increases or decreases the brightness of the picture. Press or , select
the desired level, and then press SELECT.
Range: 0-100
Adjust the horizontal position of the picture. Press or to select the
desired level, and then press SELECT. Selectable only when VGA input is
in use.
Range: 0-100
To Next Page
Loading...
Need help?
General