EasyManua.ls Logo

Middle Atlantic Products Premium+ RLNK-P915R User Manual

Middle Atlantic Products Premium+ RLNK-P915R
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Advanced User Manual
Premium+ PDU with RackLink™
Monitor | Control | Alert | Report | Analyze
THANK YOU
Thank you for assisting our customers with their Premium+ PDU with RackLinkproduct. Please read these
instructions thoroughly before installing or assembling this product.
I-00852 Rev B
(Model RLNK-P915R Shown)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Middle Atlantic Products Premium+ RLNK-P915R and is the answer not in the manual?

Middle Atlantic Products Premium+ RLNK-P915R Specifications

General IconGeneral
ModelRLNK-P915R
TypePower distribution unit
Rack Units1U
Input Voltage120V
Total Current15A
Number of Outlets9
Surge ProtectionYes
Cord Length15 ft
Plug TypeNEMA 5-15P
Outlet TypeNEMA 5-15R
Width19 in
Height1.75 in
Depth3.5 in
MaterialSteel
ColorBlack
MountingRack-mountable

Summary

Chapter 1: Introduction

Chapter 2: Configuring the PDU

Connecting the PDU to a Computer

Details on connecting the PDU to a computer via USB, Ethernet, or Console.

Initial Network Configuration via CLI

Steps for initial network configuration using CLI commands.

Installing the USB-to-Serial Driver (Optional)

Procedure for installing the USB-to-Serial driver for Windows.

Chapter 3: Additional PDU Information

Reserving IP Addresses in DHCP Servers

How to reserve IP addresses for PDUs in DHCP servers using their serial numbers.

Chapter 4: Using the Command Line Interface

Logging in to the CLI

Methods for logging into the PDU's Command Line Interface.

Security Settings

Overview of PDU security settings configurable via CLI.

User Configuration Commands

Commands for creating, modifying, and managing user profiles.

Outlet Configuration Commands

CLI commands for configuring individual outlets on the PDU.

Resetting the PDU

Procedures for restarting or resetting the PDU to factory defaults.

Network Troubleshooting

Commands and procedures for troubleshooting network issues.

Chapter 5: Bulk Configuration Methods

Bulk Configuration or Firmware Upgrade via DHCP/TFTP

Method for configuring or upgrading multiple PDUs using DHCP/TFTP.

Configuration or Firmware Upgrade with a USB Drive

Method for configuring or upgrading PDUs using a USB flash drive.

Configuration Files

Description of configuration files (fwupdate.cfg, config.txt, devices.csv).

Chapter 6: Using Secure Copy (SCP) Commands

Firmware Update via SCP

Procedure for updating PDU firmware using Secure Copy (SCP).

Bulk Configuration via SCP

Procedure for performing bulk configuration using Secure Copy (SCP).

Backup and Restore via SCP

Procedure for backing up and restoring PDU settings via SCP.

Chapter 7: Enabling Service Advertising

Chapter 8: Troubleshooting

Windows NTP Server Synchronization Solution

Solution for NTP server synchronization issues with Windows servers.

Chapter 9: Compliance with IEC 62020

WARRANTY

Related product manuals