1111
1212
1111
1212
Setting both TIMER ON and TIMER OFF at the same time
Keep in mind that the time periods you set for both functions refer to hours after the
current time. For example, say that the current time is 1:00 PM, and you want the unit
to turn on automatically at 7:00 PM. You want it to operate for 2 hours, then automa-
tically turn off at 9:00 PM.
Example: Setting the unit to turn on after 6 hours, operate for 2 hours, then turn off
(see the figure below)
Your remote display
Do the following:
ON/OFF
ON/OFF
MODE
MODE
SHORT
SHORT
CUT
CUT
TIMER O
N
TIMER O
N
TEMP
TEMP
sec
sec
4
8
3
7
X12
X16
2
6
Temp
or
Temp
or
1
5
Timer is set To turn ON
6 hours from current time
Timer is set to turn OFF
8 hours from current time
2PM 3PM
4PM 5PM
6PM 7PM 8PM 9PM
Timer starts
Unit turns Unit turns
ON
OFF
6 hours later
8 hours later
To Next Page
Loading...
Need help?
General