9
6)
the hole caps on right side.
Place refrigerating chamber door on bottom hinge then fix the middle hinge on left side and insert
7) Place freezer chamber door on middle hinge
then fix the top hinge,top hinge cover on left side and
insert hole caps on right side.
5) Exchange the installation position of bottom hinge and adjustable foot,then fix them respectively.
Remove the hinge sleeve pipe of the refrigerating chamber door,and install it on the other side.
Remove the hinge sleeve pipe of the freezing chamber door and install it on the other side.
The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor
To Next Page
Loading...
