:
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
24
IPM Continuity Check
Turn off the power and allow the large capacity electrolytic capacitors to discharge completely. Next, dismount the IPM. Use a digital tester to
measure the resistance between P and UVWN; UVW and N.
Table 16 — IPM Continuity Check
Digital Tester
Normal
Resistance Value
Digital Tester
Normal
Resistance Value
(+) Red (-) Black
(Several M)
(+) Red (-) Black
(Several M)
P
NU
N
UV
VW
W(+) Red
To Next Page
Loading...
