:
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
36
DIAGNOSIS AND SOLUTION (CONT)
High temperature protection of IPM module (PC02)
Description: If the IPM module temperature is higher than the limited value, the LED displays an failure code.
Recommended parts to prepare:
• Faulty PCB
• Connection problems
Troubleshooting and Repair:
Replace the outdoor
control PCB.
Tighten the screws and apply
silicon grease.
NO
YES
Check the screws on the
PCB and IPM radiator.
Are they
secured tight?
To Next Page
Loading...
