Midea Ducted Series - Fault Alarm Handing

13. Fault alarm handing
Press COPY to confirm.
Other days can be copied by repeating steps 4 and 5.
Press CONFIRM to confirm the settings.
Press BACK to revert to the weekly timer.
During the weekly timer setting, press CONFIRM.
Press “ ” or “ ” to select the setting time want to delete. The setting time, mode, temperature and fan
speed appear on the LCD. The setting time, mode, temperature and fan speed can be deleted by pressing the
DEL (day of).
If the system does not properly operate except the above mentioned cases or the above mentioned
malfunctions is evident, investigate the system according to the following procedures.
The error displayed on the wire controller are different from those on the unit. If error code appears, please
check the <<Owner’s And Installation Manual>>and<<SERVICE Manu-al>>.
Press “ ” or “ ” to select the day of the week and then press CONFIRM.
ex. Copy the setting of Monday to Wednesday
Delete the time scale in one day.
5
6
7
8
1
2
3
ex. Delet the time scale 1 in saturday
MALF U N C T I O N & PROT EC T I O N D EF IN E
D I SPLAY
D IGITAL TU BE
NO.
1
Error of communication between wire
controler and indoor unit
55