Midea HD-332RWEN - Page 33

Service Manual_2020-V1.0
33
15）Use the vise grip pliers clamp the middle of the
process pipe, then seal welding process tube⓯⓰.
Piping system in the compressor case
❶.Drain tray
❷. condenser(enter)
❸.condenser(exit)
❹.anti-dew tupe assembly(exit)
❺.anti-dew tupe assembly(enter)
❻.main control board box assembly
❼.compressor
❽.suction transition tube
❾.Power wire
❿.dry filter
Drain tray
1）Disengage the drain tray buckle out of the compressor
bottom plate installation hole.