Midea HD-332RWEN - Display Control Board

Service Manual_2020-V1.0
34
2）Replace the drain tray, the reverse process can
complete installation.
3）Remove the screws from the back of cabinet assembly
4）Replace the drain tray, the reverse process can
complete installation.
7.8 Display control board
Display control board
1） Pry open the buckle of the display control board
installation box with a straight screwdriver
2） Pull all connector terminals out;
3） Remove 2 screws using a cross screwdriver to
remove the display control board;
4） Replace the master control board in reverse
steps;