9
2
4
6
Replacement of the filter components
Filter model:
FC-35S1A (include 1)
1
Replace a new filter
3
4
Long press timing button for 3s,
reset the HEPA filter.
Long press for 3s
2
When the filter replacement
light is on, it reminds that the
HEPA filter should be replaced.
If it is not replaced in time, the
prompt will appear every
startup.
Disassembly protection
reminder
Error code Error description Handling method
Properly installed inlet
grille
Sensor failure Contact the after-sales
Contact the after-salesAbnormal fan speed
Service Guide
Before inviting someone to inspect or repair, please check the following items.
Faults Handling
To Previous Page
Loading...
