17
PLEASE INPUT THE
PASSWORD
OK
0 0 0
Press " ▲ " and " ▼ " buttons to change the number to enter, and Press " ◄ " and
" ► " buttons to change the bit code to enter. After the number is entered, the display is not
changed. After entering the password, Press " " button to enter the interface or Press
" " button to go back to the previous interface.
Display as follows if the input is incorrect:
SORRY WRONG PASSWORD
PLEASE INPUT AGAIN
OK
0 0 0
Enter setting page as follows if the input is correct:
SERVICE MENU
OK
STATE QUERY
SETTING ADDRESS
HEAT CONTROL
CLEAR HISTORY ERRORS
SERVICE MENU
OK
TMEPERATURE COMPENSATION
MANUAL DEFROST
LOW OUTLET WATER CONTROL
PUMP CONTROL
2/3
SERVICE MENU
OK
VACUUM SWITCH
DHW ENABLE
FACTORY DATA RESET
ENERGY SAVING SWITCH
3/3
To Next Page
Loading...