07 08
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Always purchase the correct cell or battery for the
equipment.
Keep cells and batteries clean and dry.
Wipe the cell or battery terminals with a clean dry cloth if
they become dirty.
Secondary cells and batteries need to be charged before
use. Always use the correct
charger and refer to the manufacturer’s instructions or
equipment manual for proper charging instructions.
Do not leave a battery on prolonged charge when not in
use.
After extended periods of storage, it may be necessary to
charge and discharge the cells
or batteries several times to obtain maximum performance.
Secondary cells and batteries give their best performance
when they are operated at normal room temperature (20 °C
± 5 °C).
Retain the original product literature for future reference.
Use only the cell or battery in the application for which it
was intended.
When possible, remove the battery from the equipment
when not in use.
Dispose of properly.
10.
11.
Keep cells and batteries out of the reach of children.
Seek medical advice immediately if a cell or a battery has been
swallowed.
[symbol IEC 60417-5957
( 2004-12 )]
[symbol ISO 7000-0790
( 2004-01 )]
[symbol IEC 60417-5031
( 2002-10 )]
[symbol IEC 60417-5032
( 2002-10 )]
[symbol IEC 60417-5172
( 2003-02 )]
time-lag miniature fuse-link where X is the symbol for the
time/current characteristic as given in IEC 60127
for indoor use only
read operator's manual
direct current
alternating current
class II equipment
To Next Page
Loading...
Need help?
General
Weight and Dimensions
