07 08
12.
13.
14.
15.
16.
17.
18.
19.
Keep cells and batteries clean and dry.
Wipe the cell or battery terminals with a clean dry
cloth if they become dirty.
Secondary cells and batteries need to be charged
before use. Always refer to the instruction manual
and use only the charger that specify by the
manufacturer.
Do not leave the battery for prolonged charging
when it is not in use.
After a long periods of storage, it is necessary to
recharge and discharge the cells or batteries
several times to maximize it performance.
Secondary cells and batteries give their best
performance when they are operated at normal
room temperature (20 °C ± 5 °C).
Remove the battery from the equipment when it
is not in use.
Dispose the cells and batteries properly.
[symbol IEC 60417-5957
( 2004-12 )]
[symbol ISO 7000-0790
( 2004-01 )]
[symbol IEC 60417-5031
( 2002-10 )]
[symbol IEC 60417-5032
( 2002-10 )]
[symbol IEC 60417-5172
( 2003-02 )]
time-lag miniature fuse-link where X is the symbol for the
time/current characteristic as given in IEC 60127
for indoor use only
read the instruction manual
direct current
alternating current
class II equipment
To Next Page
Loading...
