3.2 Functions
Notes:
(The picture above is only for reference. The actual configuration will depend on the physical product
or statement by the distributor)
1) Setting button
A: Setting button
2) Display screen
LED: gear( COLD)①
LED: gear ②
LED: gear (MID)③
LED: gear ④
LED: gear (COLDER)⑤
3) Display
When the refrigerator is on power, the display screen all LED light for 3 seconds, the default
temperature is MID gear).(③
When there is a failure, the LED light shows the fault code (loop display), the LED light displays as
following table:
4) Gear setting
Every time you pre
ss setting button, the gear changes once, after setting the gear15s, the refrigerator will
run according to the setting value.
Gear adjustment to:
5) Memory Function
The refrigerator can keep memory of following running status when power off.
Error code
Error description
LED flashing ⑤ ,④
Temperature sensor failure of refrigerating chamber
LED⑤, ③ flashing
Defrost temperature sensor failure of freezing chamber
LED⑤, ② flashing
The ambient temperature sensor failure
13
A
①
② ③ ④ ⑤
6)
Damper adjusting slider
1gear
2gear 3gear 4gear
5gear
The initial position of the damper adjusting slider is on the far right side.
For better user experienc,it is recommended to push the slider to right position,and turn
the SETTING KEY to MID position.If it is not enough cool inside the refrigerator compartment,
please check whether the slider is in left position,turn the slider to the right side.
COLDER FRIDGE
COLDER FREEZER
To Next Page
Loading...
