Pattern Paper
Panel fixing screw (M4X16)
Ceiling hole
width
Ceiling hole length
Outline of Indoor Unit
Hole
MDV-D28~36Q1/BN2
Adjust the relative position between indoor
unit and ceiling hole with the pattern paper
again.
MDV-D45~71Q1/BN2
Panel outline dimension1420
Ceiling hole dimension 1360
Panel center 585
30
65
50
630
570
110
655
695
755
125
30
530
30
30
645
Panel outline dimension
Ceiling hole dimension
15
20
50
110
Indoor unit
ceiling
installation paper pattern
Front (side of pipe)
Back
ceiling
Installation Paper Pattern
¢Ù
¢Ú
¢Û
Install the hanging nut into U grove of the
hanging tool. Overhang the indoor unit and
ensure it is level using a level gauge.
Use the installation paper pattern to confirm
the position between the body and the ceiling
opening
Please refer to the following figure to install.
Fix the pattern paper to the down side of indoor
unit with panel fixing screw.
Adjust the size of ceiling hole according to
pattern paper.
Pattern paper
Down side of pattern paper
Down side of ceiling
Indoor unit
Down side of
pattern paper
at the same level
Down side of ceiling
Down side of ceiling must be level with
down side of the pattern paper.
Panel Length
Panel Centre
Indoor Unit size
Ceiling Hole Length
Hanging Bolts Distance
Hanging Bolts
Distance
Panel Width
Indoor Unit Size
Ceiling Hole Width
4
To Next Page