R410A DC Inverter VRF V4 Plus W Series 50Hz MCAC-VTSM-2016-04
214 Troubleshooting
2) L1/L4 troubleshooting
Step 1: Check the DC voltage between 1 and 2 terminal, the normal value should be 510V~580V, if the voltage
is lower than 510V, go to step 2.
Step 2: Check whether the wires of rectifier circuit are loose or not. If wires are loosen, fasten the wires. If wires
are OK, replace the main PCB.
To Next Page
Loading...
