4.Select the required function through the
control panel - the machine will show the set
temperature and time or set the required time
and temperature through the DIY function.
Press the start key and the machine will enter
the cooking state.
If the frying barrel is not pushed in totally,
the micro switch will not be triggered and the
machine will remain in a powered-off state. You
will be required to push the frying barrel in
totally for the machine to function. The machine
has a two-hour power off memory meaning that
after removing the barrel during cooking to stir,
you can push the barrel back into the machine
and cooking will continue the cooking process
prior to removal of the barrel.
After reaching half of the time set, the machine
will chime five times and the "shake"light will
show. Pull out the barrel and flip the food to a
different cooking side.
The machine will chime after cooking is completed. Unplug the machine from
power and pull out the barrel and place on a flat steady surface. To avoid,
scalding or toppling of the frying barrel, use utensils to carefully take out the
food on a flat steady surface.
To Next Page
Loading...
Need help?
General
