3 OPERATION
29
Press the [Delay]&[Spin] button for 3sec.
the buzzer is mute.
Start
To act the buzzer function, press the two buttons again for 3 seconds.
The setting will be kept until the next reset.
When the Child Lock is activated, the display will alternately show
“CL” and the remaining time.
Pressing any other button will cause the Child Lock indicator to flash
for 3 sec. When the program ends, “CL” and “END” will alternate on
the display for 6 sec .
The Child Lock deactivates the function of all buttons except the
On/Off button and the Child lock button!
Only the simultaneous pressing of the two buttons [Extra Rinse] and
[Pre Wash] can deactivate the Child Lock!
Please deactivate the Child Lock before selecting a new program!
Child Lock
This function is meant to keep children from misusing the controls.
Extra
Rinse
Pre
Wash
Mute the buzzer
Delay
Spin
• MuAfter ting the buzzer function, the sounds will not be activated
any more.
Caution!
Caution!
Press [Extra Rinse] and [Pre Wash] simultaneously
for 3 sec until the buzzer beep. The child lock
indicator switches on.
Usage counter
1 Unplug the equipment for 10s and reconnect again.
2 Power on and within 10s, please press " delay" and "prewash"
on control panel for around 5s
until the device display shows digits--the value can indicate the
times of equipment usage.
3 Repeat step 1 again and customer can resume to normal
operation.
.
.
simultaneously and continuously
.
Note!
To Next Page
Loading...
Need help?
General
