3 OPERATION
28
Child Lock
This function is meant to keep children from misusing the controls.
Press [ ] simultaneously for 3 sec
until the buzzer beep. The child lock indicator switches
on.
3s for Child Lock
Caution!
When the Child Lock is activated, the display will alternately show
“CL” and the remaining time.
Pressing any other button will cause the Child Lock indicator to
flash for 3 sec.When the program ends, “CL” and “END” will
alternate on the display for 10 sec, then the indicator will flash
for 3 sec.
The Child Lock deactivates the function of all buttons except the
On/Off button and the Child lock button!
Only the simultaneous pressing of the button [3s for Child
Lock] can deactivate the Child Lock!
Please deactivate the Child Lock before selecting a new
program!
Press the [Extra Rinse]button for 3sec.
to mute the buzzer.
Mute the buzzer
To act the buzzer function, press the button again for 3 seconds. The
setting until the next reset.
will be kept
Start
SteamCare
SteamCare is the function added before main wash, which will
generate warm steam to sterilization and greater washing
performance especially for cold wash.
AutoClean
The self-clean function will be automatically activated
during every washing cycle. Hygiene Pro system will keep
your laundry always clean. Environmentally save time and
ease your laundry.
Some programs have automatically added AutoClean or SteamCare
functions, these two functions can’t be manually selected or canceled.
Caution!
Turbo
The function can decrease the washing time.
To Next Page
Loading...
Need help?
General
