3 OPERATION
Turbo
The function can decrease the washing time.
AutoClean
Auto Clean is used to clean the drum as a default function
andis only applicable to the following programs-Rinse&Spin,
Steam care,Allergy care, Jeans, Mix and Cotton. It will
happen between first and secondrinse. A small amount of
water is fed and the drum will be rinsed. Thisfunction will be
continued about 10mins.
SteamCare
SteamCare is the function added before main wash, which will
generate warm steam to sterilization and greater washing
performance .
Some programs have automatically added AutoClean or SteamCare
functions, these two functions can’t be manually selected or canceled.
27
Spin
When needed, the spinning speed can be adjusted pressing the Speed
button in the following steps: 1400:0-400-600-800-1000-1200-1400.
Pre Wash
Extra washing function before the main washing cycle starting to
increase the washing performance.
Note: Detergent needs to be added to the detergent dispenser
compartment I.
Dry
Press the Dry button continuously to choose the dry level: Gentle
Dry(Soft)/Normal Dry(Normal)/ Extra Dry,and Time Dry.
d-1
d-2
d-3
Normal Dry(Normal): Clothes are ready for storing in the cupboard.
Gentle Dry(Soft): Clothes are dried to damp state for ironing.
Extra Dry: Clothes are dried complete to be worn directly.
Timed Dry:Drying your laundry and finish within given time.
(30/60/90/120/180 minutes)
Caution!