Function
Select
10
19
Mute the buzzer
To act the buzzer function, press the button again for 3 seconds. The setting
will be kept until the next reset.
After Muting the buzzer function, the sounds will not be activated any more.
Caution!
OPERATIONS
Choose the Programme
When child lock is activated and program starts, child lock indicator will switch on,
and the CL and remaining time on the display are alternately displayed in 0.5s.
Press the other buttons will make child lock indicator flash for 3s. when program
finish,CL and END alternate for 10s in 0.5s, then the child lock lights flash for 3s
Only press and hold the two button can release child lock, even power off,
switch off and program end
The "Child Lock" will lock all buttons except Power button and Child Lock
button
Please release child lock before selecting program and staring washing
Caution!
Child Lock
To avoid mis operation by children.
Press [Function] and [Select]
3 sec. till buzzer beep.
Press the [Temp.]and[Spin] for 3sec.,
the buzzer is mute.
Temp.
Spin
To Next Page
Loading...
Need help?
General
