9
III.CLEANING AND MAINTENANCE
b) Troubleshooting
Here are the recommended inspections of common failures:
Problems
Points to check
- Make sure that the plug is inserted tightly.
- Make sure that the switch, socket, fuse and
power line are in good condition.
- Let the appliance cool down
- Let air entry and air vent free - Set again the
timing
- Refer to failure codes
- Make sure that the containers are suitable
for induction cooker.
- Sent it to service facility to repair
After adjusting the voltage, the unit restores
its work.
Send it to service facility to repair.
After a moment, temperature inside the
cooker returns to normal. The unit can
restore its work once the « on/off» button is
pressed.
The button (1) lights up but heating
does not start.
After the plug in the socket, the indicator
(1) and the screen do not light up.
Heating stops suddenly during
operation.
Failure
codes
E3, E6
E7, E8
E1, E2, E4, E5, E8
SPECIAL DECLARATION
If there is technical amendment for the product, it will be edited into the updated
version of the instruction manual. Please be aware that we will not inform
customers of this separately. If the appearance or color of the product is
modified, please refer to the real appliance as a standard.
To Next Page
Loading...
Need help?
General
