EasyManua.ls Logo

Midea MOB2-12HN1-QC2 - Page 52

Midea MOB2-12HN1-QC2
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
For 21k,24k models:
1) Defrosting condition:
AC will enter defrosting mode if any of the following items is satisfied.
(1) When T3TC1, if th e compressor keeps running over 40 minutes and T3TC3 for 3 minutes.
(2) After the last defrosting, the time that the outdoor fan is off but the compressor is on in high T2
protection cumulates up to 90 minutes.
2) Condition of ending defrosting:
If any one of the following items is satisfied, the defrosting will terminate and the machine will turn to
normal heating mode.
(1)T3 rises to be higher than TC2.
(2)The machine has run for 10 minutes in defrosting.
3) Defrosting action
For MSR1-16HRN1-QB8(A),MSR1-18HRN1-QC2, MSR1-07HRN1-QB6(A) models:
Condition of defrosting:
If any one of following items is satisfied, defrosting will start.
Condition 1: Both the following conditions are satisfied:
A: If the working time of the compressor accumulates to 42 min and one continuous
working time is more than 330s.
B: Check the temperature difference between T2 and T1
Fan speed
T2-T1 Note
High
TH
DEFROST
If indoor fan is in high speed and T2-T1< TH
DEFROST
, start defrosting
Medium
TM
DEFROST
If indoor fan is in medium speed and T2-T1< TM
DEFROST
, start defrosting
Low
TL
DEFROST
If indoor fan is in low speed and T2-T1< TL
DEFROST
, start defrosting

Related product manuals