Midea MOD30U-36CN1-R - Page 122

The Specification of Power
118
8.
NOTE: The cable size and the current of the fuse or switch are determined by the maximum current
on
cable, fuse and switch.
The Specification of Power
118
The Specification of Power
8.
Model
18000Btu/h
24000Btu/h
48
000~60000Btu/h
NOTE: The cable size and the current of the fuse or switch are determined by the maximum current
on
the nameplate which located on the side panel of the unit. Please refer to the
cable, fuse and switch.
The Specification of Power
The Specification of Power
Model
18000Btu/h
24000Btu/h
000~60000Btu/h
NOTE: The cable size and the current of the fuse or switch are determined by the maximum current
the nameplate which located on the side panel of the unit. Please refer to the
cable, fuse and switch.
The Specification of Power
220
220
380
NOTE: The cable size and the current of the fuse or switch are determined by the maximum current
the nameplate which located on the side panel of the unit. Please refer to the
The Specification of Power
Power supply
220
-240V
~
50Hz
220
-240V
~
50Hz
380
-415V
~
50Hz
NOTE: The cable size and the current of the fuse or switch are determined by the maximum current
the nameplate which located on the side panel of the unit. Please refer to the
Power supply
Input Rated Amp
(Switch/Fuse)(A)
50Hz
50Hz
50Hz
NOTE: The cable size and the current of the fuse or switch are determined by the maximum current
the nameplate which located on the side panel of the unit. Please refer to the
Input Rated Amp
(Switch/Fuse)(A)
25/20
32/25
32/25
NOTE: The cable size and the current of the fuse or switch are determined by the maximum current
the nameplate which located on the side panel of the unit. Please refer to the
nameplate before selecting the
Input Rated Amp
(Switch/Fuse)(A)
Power Cord Size
(≥3.3 mm² for with PTC)
NOTE: The cable size and the current of the fuse or switch are determined by the maximum current
nameplate before selecting the
GA Floor
Power Cord Size
≥2.5 mm²
≥2.5 mm²
(≥3.3 mm² for with PTC)
≥2.5 mm²
NOTE: The cable size and the current of the fuse or switch are determined by the maximum current
indicated
nameplate before selecting the
GA Floor
-
standing type
(≥3.3 mm² for with PTC)
indicated
nameplate before selecting the
standing type