12
EN
Operating instructions
Refrigerator settings
• Press the refrigeration key to adjust the refrigeration set gear, each press the
refrigeration key once, the gear change one gear, the order is as follows:
8℃
4
℃
2℃
Freezer settings
• Press the refrigeration key to adjust the refrigeration set gear, each press the
refrigeration key once, the gear change one gear, the order is as follows:
-16℃
-19℃
-2
3
℃
Note: The temperature of each gear is within ±2 of the set temperature, and the actual
situation is slightly different according to the load situation.
Alarm off
• When a fault alarm occurs, press the alarm off key short, and the fault alarm sound
is canceled.
Open the door and alarm
• When the freezer door or refrigerator door opens for 120 seconds without shutting
down or not closed well, the buzzer alarms until the freezer door or refrigerator
door closes. Or press the alarm off key to cancel the buzzer alarm.
Standby mode
• Press the alarm off key for 3 seconds to enter standby mode, cooling stops, light
not on, display is off
.
In standby mode, long press the alarm off for 3 seconds, return
to normal control.
Fault indication
• The following warnings appearing on the display indicate corresponding faults
of the refrigerator. Though the refrigerator may still have refrigerator a freezing
function with the following faults, the user shall contact maintenance specialist for
maintenance, so as to ensure normal use of the refrigerator.
Fault Code Fault Description
LED1/LED2 ashing Refrigerator temperature sensor fault
LED1/LED5 ashing Freezer temperature sensor fault
LED1/LED3 ashing Freezing frost sensor faults
LED2/LED4ashing Communication failure
LED1/LED4 ashing Ambient temperature sensor faults
LED2/LED5 ashing Humidity sensor error
To Next Page
Loading...
Need help?
General
