11
Refrigerator
Safety
Operation
Requirements
Parts and
Features
Installation
Refrigerator
Use
Refrigerator
Care
Troubleshooting
Before
Use
2)
4) Remove the refrigerating door,
remove the bottom hinge and
adjustable foot of the other side.
3)
5)
6)
Remove the hinge cover, then
remove the upper hinge screws,
upper hinge and hole cap on the
other side.
Remove the freezer door, the
middle hinge,the screw hole caps.
Remove the screws and limit
cover of refrigeration.
blocks fixed on the lower end
Install the adjusting foot to the
right side, take out 2 limit blocks
from the plastic bag in the
to the left side of the lower end
instruction manual and fix them
cover respectively with screws,
And freeze the left side of the
lower end cover, remove the
other side of the lower hinge from
the instruction bag and install it on
the left side.
Place the refrigerating door
from top to bottom, take out the
gasket from the plastic bag in the
instructions and put it into the
axle hole on the left side of the
refrigerating door, as shown in the
picture. Fix the center hinge with
screws and install the studs.
To Next Page
Loading...
