Midea MSY-09HRDN1-QC8 - 2 Function

4
2. Function
When the power supply is
interrupted and then restore, the
air conditioners automatically
restore the previous function
setting.
Maintain the room temperature in
accordance with the setting temperature.
The
mode can be change by the room
temperature.
The louver can be set at the desired
position or swing up and down
automatically
The function is usually used in rainy
days in springtime or damp areas.
The fan is turn to low speed
(cooling/heating).
The unit will be turn off at the seventh
The unit will decide the louver direction
according to
op
eration mode.
Turbo, high, med, low, breeze.
Restarting is for approx. 3
minutes..
Prevent the water being fr
ozen
on evaporator by
sensing the evaporator pipe temperature in
cooling mode
Room temperature
sensor.
Pipe temperature
Indoor unit
Operation by remote
controller
Sensing by room
temperature
Room temperature
control
Anti-freezing control in
cooling
Time Delay Safety
control
Indoor fan speed control
Two-direction air vane
Sleep mode auto control
Independent
dehumidification
Air flow Direction control
Auto mode
Temp. Compensation
Flexible wiring
connection
Auto defrost
Anti-cold function
Self-diag. function
Auto-restart function
Super Ionizer
Prevent the cold wind
at
the beginning of unit start.
Follow
me
Self clean
Compact
design
Golden fin
(Optional)