Product Features
Page 82
Putty
Putty
Putty
Trap
Trap
Trap
Note: DO NOT allow water to enter the remote control. Use the trap and putty to seal the wires.
• For exposed mounting, cut holes on four of the sides according to the picture below.
Cut three holes
for wire outlet
Cut one holes
for wire outlet
• For shielded wiring, please refer to the picture below.
Diameter of wall hole: Φ 2cm
Embedded switch
box wiring
Wiring hole
Wiring through the wall
Wall hole and wiring hole
To Next Page
Loading...
