Operating
Instructions
Page 11
Air Conditioner Features - MWMWT060CR1A Model
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel as shown below
and all its functions, then follow the symbol for the functions you desire. The unit can be
controlled by the unit control alone or with the remote controller.
AUTOAUTO
ADJUSTS
TEMPERATURE
OR TIME
DISPLAYS
TEMPERATURE
OR TIME OR
ERROR CODES
ADJUSTS
TEMPERATURE
OR TIME
COMFORT
SENSE
FEATURE
SET MODE
SLEEP MODE
ACTIVATES
TIMER
TURNS UNIT
ON OR OFF
SETS FAN
SPEED
ENERGY
SAVER MODE
CHECK
FILTER RESET
BUTTON
UNIT CONTROL
TO TURN UNIT ON OR OFF:
Press ON/OFF button to turn unit
NOTICE
The unit will automatically initiate
the Energy Saver function under
Cool, Dry, Auto (only Auto-
Cooling and Auto-Fan) modes.
TO CHANGE TEMPERATURE
SETTING:
Press Power button to turn unit on
NOTICE
Press or hold either UP/
DOWN button until the desired
temperature is seen on the
display.
This temperature will be
automatically maintained
anywhere between 62°F (17°C)
and 86°F (30°C). If you want
to display the actual room
temperature, see To Operate on
Fan Only section.
TO ADJUST FAN SPEEDS:
Press to select the Fan Speed in
four steps-Auto, Low, Med or High.
Each time the button is pressed,
the fan speed mode is changed. On
Dry mode, the fan operates on Low
speed automatically.
To Next Page
Loading...
