2
nd
Generation ALL IN ONE Type Heat Pump Water Heater Technical Manual
Running Operation
Auto/Manual start up, Energy-saving, standard, Enhanced
heating type heating water
Protection Method
High-pressure protection, Over-load protection,
Temp protection, Electric leakage protection
Dimension (D*H) mm Φ650×1920
Packing (W*H*D) mm 745*2030*775
Outdoor unit
Net/Gross weight kg 113/129
Refrigerant type/Quantity Kg R134a/1.2
Design pressure
(Operating pressure Refrigerant)
MPa 3.0/1.2
Tank pressure Mpa 0.15/0.7
Tank Foaming Material/Depth(mm) polyurethane/55mm
Ambient temp ℃ -30~43
Diameter, water inlet pipe mm DN20
Diameter, water outlet pipe mm DN20
Diameter, drainage pipe mm DN20
Diameter, PT valve joint mm DN20
PT valce Brand Watts (active condition 99℃ or 1.0Mpa )
Rated pressure MPa 1.2
Max. Operation pressure MPa 0.7
Water outlet Temp ℃ (default) 55℃, 38℃～60℃
water
pipeline
Heat exchanger Copper tube wrapped around outside of tank
Diameter, water inlet pipe
mm
DN20
Diameter, water outlet pipe mm DN20
Heat exchanger Surface heat exchanger; Stailess steel SUS316L
heat exchanger tupe Dim.*Length mm Φ22*10000
heat exchanger area m2 0.7
Solar heat
exchanger
pipeline
Max.pressure MPa 0.7
Power wiring
mm2
4
Connection
wiring
Signal wiring
mm2
0.75
Fresh Air Diameter
mm
190.0
static pressure
Pa
30.0
Fresh air
Max Length
m
10.0
Hot Water Yield m3/h 0.075 0.075 0.064
Electric Heater kW 3.0
Remark:
1. The test conditions: outdoor temp. 15/12℃(DB/WB), inlet water temp. 15℃, outlet water temp. 45℃.
2. The operation range:-30℃-48℃, heat pump operation range: -7℃-43℃
3. The specification may be changed for product improvement, please refer to the nameplate.
12
To Next Page
Loading...
