Midea S8+ - Page 31

21:45
4G
Main unit stuck-2
Side brushes and the roller
brush are stuck,
and the robot cannot
travel normally
Clean up sundries by
which the roller brush/side
brushes are stuck, and
place the main unit on a
flat floor to start it
Main unit stuck-3
The chassis of the main
unit is stuck by obstacles
Clean relevant area or
establish a prohibited area
after cleaning up
obstacles
Main unit does not
complete the cleaning
but returns to charge
The main unit senses
its lower battery level
Return the main unit to charge
Prohibited
area
Solutions
Fault
description
Possible
causes
24