6
After usage, roll up the feeder cord around the rolling clasp for easy storage.
Usage as a hand vacuum cleaner
Detach the extension tube from the vacuum cleaner by unlocking the clip on the
handle.
NOTE: You may leave the crevice tool or the brush attached to the hand vacuum
cleaner when it is thus used.
Press on the “I” button of the on/off switch to turn on the vacuum cleaner. When you
have finished using it, press on the “O” button of the on/off switch to turn it off.
CLEANING AND CHANGING DUST FILTER
Cleaning and changing the dust filter
To have your vacuum cleaner work under the best conditions, empty the dust
container and clean the filter after each usage.
1. Fig. 7
To remove the dust container, press on the button to
release dust container
Fig. 8
Remove the dust container from the vacuum
appliance.
2. Fig. 9
Pull out the dust filter.
3. Empty the dust container.
4. Rinse the dust filter with cold water and let it dry for 24 hours before replacing in the
vacuum cleaner.
Press on the
release button
of dust
container.
Separate the dust container
from the main part.
To Next Page
Loading...
