11
Using iOS device to do network configuration
5
Press “ + Add Device ”
6
Select the appliance you
are setting up
1
2
3
4
Make sure your mobile device has already been
connected to the Wireless network which you want to
use. Also, you need to forget other irrelevant Wireless
network in case it influences your configuration process.
Disconnect the power supply of AC(some units).
Connect the power supply of AC, and continuously
press the “LED DISPLAY” button or “DO NOT
DISTURB” button seven times in 10 seconds.
When the AC displays “AP” , it means that the AC
Wireless has already entered into “AP” Mode.
To Next Page
Loading...