4-3 Fan Speed Setting
Figure 6.3
Figure 6.4
Figure 6.5
15
In the "Auto", "Cool", "Dry", or "Heat" mode, press ▲ and ▼ buttons to adjust to the setting
temperature. (see Figure 6.4)
Auto →Cool→Heat→Dry→Fan
• The "Auto" mode is not available for all air conditioner models.
• In the "Auto" mode,press ▲ and ▼ buttons,"Cool", and "Heat" button blink.Press
to set cool and heat setpoint temperature. press (Cancel) button to exit the settings page.
• Temperature setting is not available in the "Fan" mode.
• "Dry" mode is not available for FAPU .
Note:
To Next Page
Loading...