5) Dismantle the lower hinge and levelling feet;
Lower hinge
Levelling feet
6) Install the lower hinge and levelling feet on lower left side of cabinet;
Levelling feet
Lower hinge
7) Put the door on lower hinge vertically, and validate the gas tightness of door gasket, take out
the spare upper left hinge and hinge cover from accessory bag, then install the upper left hinge
by fitting screws. Finally to install the hinge cover , and cover the hinge hole cap on upper right side
(The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor)
10
To Next Page
Loading...
Need help?
General