Front panel view：
The cabinet of the MIDI2x2 is clearly marked.
On the front side you find the manufacturer logo and power LED . You also can
find the USB port. Please connect this USB port with the USB cable to a free USB
port on your computer. Please do NOT use an USB Hub.
Because the MIDI 2x2 is "class compliant", you do not need to install a driver. If
the MIDI 2x2 is not recognized correct, please update your mainboards or
notebooks USB chipset drivers. Also please update for Intel system the Intel.inf
drivers, for AMD systems the AMD chipset drivers.
The MIDI2x2 is full USB powered; you do not need additional power or batteries.
Back panel view：
On the back side you find the 2 MIDI In-and 2 MIDI Out. At these ports you can
connect your MIDI hardware with standard MIDI cables. Please note that always
MIDI In ports must be connected to MIDI Out ports.
On the back side you see the 4 MIDI activity LEDs. They show you each Input and
Output MIDI activity.
Have much fun with this product!
*Design and specifications subject to change without notice
*No liability for printing mistakes
To Previous Page
Loading...
Need help?
General
