Front panel view：
The cabinet of the MIDI4x4 is clearly marked.
On the front side you find the 2 MIDI In-and Outputs 1 and 2. At these ports you
can connect your MIDI hardware with standard MIDI cables. Please note that
always MIDI In ports must be connected to MIDI Out ports.
On the front side you see the 8 MIDI activity LEDs. They show you each Input
MIDI activity.
Back panel view：
On the back side you find the 2 MIDI In-and Outputs 3 and 4. You also can find the
USB port. Please connect this USB port with the USB cable to a free USB port on
your computer. Please do NOT use an USB Hub.
Because the MIDI 4x4 is "class compliant", you do not need to install a driver. If the
MIDI 4x4 is not recognized correct, please update your mainboards or notebooks
USB chipset drivers. Also please update for Intel system the Intel.inf drivers, for
AMD systems the AMD chipset drivers.
The MIDI4x4 is full USB powered; you do not need additional power or batteries.
Have much fun with this product!
*Design and specifications subject to change without notice
*No liability for printing mistakes
To Previous Page
Loading...
Need help?
General
