http://www.midiplus.com.tw
Front panel view：
The cabinet of the MIDI8x8 is clearly marked.
On the front side you find the MIDI Inputs 1 to 8, on the back side
you find the MIDI Output ports 1 to 8. At these ports you can connect
your MIDI hardware with standard MIDI cables. Please note that
always MIDI In ports must be connected to MIDI Out ports.
On the front side you see the 8 MIDI activity LEDs. They show you
each Input MIDI activity.
On the front side you find also the USB port. Please connect this
USB port with the USB cable to a free USB port on your computer.
Please do NOT use an USB Hub.
Front panel view：
On the back side you see the 8 MIDI activity LEDs to monitor the output activity.
They show you each Output MIDI activity.
Because the MIDI8x8 is "class compliant", you do not need to install a driver. If the
MIDI 8x8 is not recognized correct, please update your mainboards or notebooks
USB chipset drivers. Also please update for Intel system the Intel.inf drivers, for
AMD systems the AMD chipset drivers.
The MIDI8x8 is full USB powered; you do not need additional power or batteries.
Have much fun with this product!
*Design and specifications subject to change without notice
*No liability for printing mistakes
To Previous Page
Loading...
Need help?
General
