midiplus X8 User Manual

4.4.1 PITCH Pulley
Modulate the effect of pitch bend: Slide up by touching then pitch rises ;
slide down then pitch downs; if you loosen then pitch returns to median.
4.4.2 MODULATION Pulley
Modulate the effect of trill: Slide up by touching then trill increases; slide
down then trill decreases.
4.4.3 Octave
Range: （X6：-2~+2，X8：-1~+1）；Modulating directly by press button
“OCTAVE”, and press two buttons at the same time to default to be octave.
5. Connector of rear panel introduction:
5.1 SUSTAIN PEDAL pedal interface:
For interface switching in sustain pedal.
5.3 USB interface:
For X series MIDI Keyboard and computer combining with other devices, to
make it convenient for information transmission and power supply.
5.2 MIDI OUT interface:
sending MIDI information to other devices.
1.Unplug power supply, the keyboard will be off.
2.Press the two buttons of OCTAVE at the same time.
3.Then connected with USB, the start up LCD of device shows “ ”, and
 loosenthe button after three seconds, it will be back to factor y reset.
6.Factor y reset:
XSeries--UserManual
06

midiplus X8 Specifications

General

Brand	midiplus
Model	X8
Category	Keyboard
Language	English