IK Multimedia`s software “Amplitube 2 Duo” is a guitar amp simulation with 2 different amplifiers
and 30 presets of american guitar amplifiers. You can use it standalone or as a VST effects plugin,
with Samplitude, Cubase, Sonar or any other VST compatible sequencer sofware.
If you run “Amplitube 2 Duo” standalone, please download and install our ASIO driver for the
Guitarface first from our homepage www.miditech.de! You can setup the Guitarface with it´s ASIO
driver in the “settings” and “audio setup” menu. Here you can adjust the sample buffers, which has
direct influence to the latency times of the Guitarface. Choose a value as low as possible, if you
adjust too low you hear interference noises, set the buffer and latency time of the driver just above
the noise threshold.
Further information on extensions, updates and other products from Miditech please check out our
homepage http://www.miditech.de!
Changes of the technical data and the design are possible
No liability is assumed for misprints
To Previous Page
Loading...
