12 | XT-30 instruction guide
Troubleshooting and radio reset
XT30 is designed to provide you with years of optimal performance. If for
some reason problems arise, refer to this chapter before contacting a service
centre in your region.
Reset
If your transceiver experiences a logical malfunction (improper symbols on the
display, blocking of functions, etc.), it may not be experiencing a true failure,
but rather a problem caused by external factors. For example, it may have an
incorrect setting brought on by a noise or spikes in the electrical system during
battery recharging. In such cases, you can reset the transceiver to its factory-
programmed settings, by resetting all parameters:
• Turn o the transceiver
• Keep pressed the ▲ button and turn on the radio at the same time. All the
functions will be reset ex-factory.
Before you go ahead with the reset, we recommend that you take note of all
the settings you have carried out as they will be deleted.
To Next Page
Loading...
Need help?
General
